The products featured here are available at www.Wine-Wall.com . The specific product used here was the Exibit-6 wine rack. However, depending on your budget and style, many other wine racks can be used for this purpose.
Step 1 - Choose Your Wall
Choose a wall in your basement. Preferably one that isn't high traffic, doesn't get much light and isn't close to any heat source (for example: furnace, washer/dryer). In most parts of the world, a south facing wall is usually the best choice as the sun never directly hits that wall and is usually the coldest wall in the home.Step 2 - Smooth Out Any Imperfections
Most concrete walls have imperfections, dents and holes. A good hammer and some poly fill should smooth out the wall and get it ready for the next step. You're not really looking for perfection here (unless you are a perfectionist!!) simply some cosmetic changes to get rid of the cold looking basement wall.Step 3 - Paint It
Step 4 - Mount Your Wine Racks
I used a cement bit on a hammer drill, pre-drilled the holes and inserted a plug. Then, lining up the wine rack, I mounted them with 2" drywall screws that fit into the plug. Ideally you want to make sure the wine rack is well secured since it will be holding full wine bottles. (on average, a wine bottle weighs 3-4 pounds!)---
Wine-Wall.com Management
info@wine-wall.com
www.wine-wall.com

No comments:
Post a Comment